Optional Attachments & Kits

Exchanging Wheels

c CAUTION: Avoid injury! The machine may fall or slip from an unsafe lifting device or supports, injuring anyone beneath it.

· Remove key before raising machine.

· Use a safe lifting device rated for the load to be lifted.

· Lower machine onto stable supports or jack stands and block wheels before servicing.


IMPORTANT: Avoid damage! Lift machine at specified points on frame. Using rear bumper as a lift point can damage the frame.

1. Park machine safely. (See Parking Safely in the Safety section.)

DM2129

2. Lift rear end of machine with a safe lifting device centered under tire support frame (A) on the side the tire is being removed.

3. Remove bolts from both wheels.

4. Remove wheels.

5. Check drive wheel tire inflation pressure.

DM2002

6. Attach wheels to hubs (B) with the valve stem facing the outside using bolts and tighten until snug.

MX10287

7. Lower machine and tighten wheel nuts to 115 Nm (85 lb-ft). in numbered sequence shown for safe wheel installation. Tighten alternately until recommended torque value is reached.

Specifications:

Tire Pressure 96.5-110 kPa (14-16 PSI)

About Our Site | Privacy | Legal