Specifications

Gear Model 14.542GS

Engine Manufacturer Briggs and Stratton

Horsepower 10.8 kW (14.5 hp)

Displacement 466 cc (28.4 cu.in.)

Spark Plug-Gap 1 mm (0.040 in.)

Cylinders One

Oil Filter None

Air Filter Paper with Foam

Transmission Gear Transaxle

Transaxle Manufacturer Dana 4360

Travel Speeds 5

Gear Speed Range

1st 2.4 km/h (1.5 mph)

2nd 3.2 km/h (2.0 mph)

3rd 5.0 km/h (3.1 mph)

4th 6.4 km/h (4.0 mph)

5th 8.0 km/h (5.0 mph)

Reverse 3.7 km/h (2.3 mph)

Automatic Model 1642HS

Engine Manufacturer Briggs & Stratton

Horsepower 11.9 kW (16 hp)

Displacement 500 cc (30.52 cu.in.)

Spark Plug-Gap 1 mm (0.040 in.)

Cylinders One

Oil Filter None

Air Filter Paper with Foam

Transmission Hydrostatic

Transaxle Manufacturer Tuff Torq K46

Travel Speed - Forward 0 - 9.2 km/h (0 - 5.7 mph)

Travel Speed - Reverse 0 - 5.5 km/h (0 - 3.4 mph)

Automatic Model 17.542HS

Engine Manufacturer Kohler

Horsepower 13 kW (17.5 hp)

Displacement 460 cc (28.1 cu.in.)

Spark Plug-Gap 1 mm (0.040 in.)

Cylinders One

Oil Filter Yes

Air Filter Paper with Foam

Transmission Hydrostatic

Transaxle Manufacturer Tuff Torq K46

Travel Speed - Forward 0 - 9.2 km/h (0 - 5.7 mph)

Travel Speed - Reverse 0 - 5.5 km/h (0 - 3.4 mph)

Electrical System (All Models)

Charging System Regulated Circuit

Charging System Capacity) 9 Amp

Battery Voltage 12 Volts

Battery Type BCI Group U1

Capacities

Models 14.542GS and 1642HS

Crankcase without oil filter 1.4 L (1.5 qt)

Fuel 8.3 L (2.2 gal)

Model 17.542HS

Crankcase without oil filter 1.8 L (1.75 qt)

Crankcase with oil filter 1.9 L (2 qt)

Fuel 8.3 L (2.2 gal)

Dimensions (All Models)

Height 98 cm (38.6 in.)

Length (Overall) 152.4 cm (60 in.)

Width (Overall) 91 cm (36 in.)

Weight 210 kg (462 lb)

Tires

Models 14.542, 1642 and 17.542

Size (Front) 15 x 6.00 - 6

Size (Rear) 20 x 8.0 - 8

Tire Pressure (Front) 97 kPa (14 psi)

Tire Pressure (Rear) 69 kPa (10 psi)

Mower Deck - 42 (3 in 1)

Blades-Rotary 2

Blade Bolt Torque 62 N·m (46 lb-ft)

Cutting Height-Approx. 25-102 mm (1-4 in.)

Cutting Width 1067 mm (42 in.)

Recommended Lubricants

Engine Oil API Service Classification SG or SF

Grease SAE Multi-Purpose EP Grease

Lubricant General All-Purpose Spray

(Specifications and design subject to change without notice.)