Specifications

Engine

Manufacturer Yanmar

Model Number 3TNE74

Type Diesel

Gross Horsepower 17.1 kW (23.0 hp)

PTO Horsepower 13.2 kW (17.7 hp)

Cylinders Three

Rated Engine Speed 3000 rpm

Speed, Fast Idle 3250

Speed, Slow Idle 1400

Operating Range 1400 - 3250 rpm

Cooling Type Liquid

Oil Filter Standard Single Element

Air Cleaner Dry Type w/ Safety Element

Drivetrain

Type 2 Range Hydrostatic

Number of Speeds Infinite

Mechanical Front Wheel Drive (MFWD) Standard

MFWD Capability All Ranges

MFWD Engagement On The Go

Final Drive Spur Gear

Rear Axle Maximum Load 1415 kg (3120 lb)

Front Axle Maximum Load 1415 kg (3120 lb)

Electrical System

Type 12 Volt

Battery Size 435 Cold Cranking Amps @ -18°C (0°F)

Alternator 20 amp

Fuel System

Type Indirect Fuel Injection

Fuel Diesel

Fuel Filter Replaceable Element

Fuel Pump In-line with Solenoid Shutoff

Steering and Brakes

Steering Power

Brakes Wet Disk

Front Wheels and Tires

Standard 18x8.5-10 R1

Optional 18x8.5-10 R3

Rear Wheels and Tires

Standard 26x12.00-12 R1

Optional 26x12.00-12 R3

Front Tire Inflation Pressures (Maximum)

18x8.5-10 R1 152 kPa (22 psi)

18x8.5-10 R3 152 kPa (22 psi)

Rear Tire Inflation Pressures (Maximum)

26x12.00-12 R1 83 kPa (12 psi)

26x12.00-12 R3 83 kPa (12 psi)

Fluid Capacities

Fuel Tank 19 L (5.0 gal)

Cooling System 3.0 L (3.2 qt)

Crankcase with Filter 2.1 L (2.2 qt)

Transmission and Hydraulic System 13.0 L (3.4 gal)

Front Axle 2.5 L (2.6 qt)

Ground Speeds

NOTE: All ground speed calculations shown are with machine equipped with standard 26x12.00-12 R1 rear tires and operated at 3000 engine rpm.

Forward-Range High 0-13.3 km/h (0-8.4 mph)

Forward-Range Low 0-6.6 km/h (0-4.3 mph)

Reverse-Range High 0-10.6 km/h (0-6.3 mph)

Reverse-Range Low 0-5.3 km/h (0-3.2 mph)

Dimensions

NOTE: Machine equipped with standard 26x12.00-12 R1rear tires and 18x8.5-10 R1front tires.

Wheelbase 1450 mm (57.1 in.)

Overall Length with 3-point Hitch 2650 mm (104.3 in.)

Overall Width 1200 mm (47.2 in.)

Tread Width @ Centerline (Minimum)

Front 905 mm (35.6 in.)

Rear 896 mm (35.3 in.)

Height From Ground

To Top of Hood (R1 Tires) 1061 mm (41.8 in.)

To Top of Hood (R3 Tires) 1054 mm (41.5 in.)

To Top of ROPS 1970 mm (77.6 in.)

Ground Clearance

Front Axle 195 mm (7.7 in.)

Turning Radius

MFWD Off 2300 mm (88.6 in.)

Weight

Machine equipped with a ROPS, 3-point hitch, standard R1 tires and all fluids. 635 kg (1400 lb)

PTO

Type Independent

Clutch Type Wet Disk

Mid PTO Brake Shoe Type

Speed-Mid PTO rpm @ 2900 engine RPM 2100 rpm

Speed-Rear PTO rpm @ 2900 engine RPM 540 rpm

3-Point Hitch

Type Category 1

Hitch Plate Maximum Vertical Load 255 kg (562 lb)

Lift Capacity-61 cm (24 in.) behind link arms 318 kg (701 lb)

Total Lift Height 248 mm (9.76 in.)

Recommended Lubricants

Engine Oil:

John Deere PLUS-4®

John Deere PLUS-50®

John Deere TORQ-GARD SUPREME®

Engine Coolant COOL-GARD PRE-DILUTED SUMMER COOLANT

COOL-GARD CONCENTRATED SUMMER COOLANT

Transmission Oil John Deere Low Viscosity HY-GARD® (J20D)

John Deere HY-GARD® (J20C)

Front Axle Oil John Deere GL-5 Lubricant®-SAE 80W-90

Grease:

John Deere Multi-Purpose SD Polyurea Grease

John Deere Multi-Purpose HD Lithium Complex Grease

(Specifications and design subject to change without notice.)