Service Steering & Brakes

Adjusting Brake (Pedals)

MX21773

1. Loosen jam nuts on brake linkage and adjust each turnbuckle (A) so there is about 22 - 30 mm (0.87 - 1.2 in.) of free play at the pedals (B).

2. Check to be sure free play is about the same for both pedals.

3. Tighten jam nuts to lock in place.

4. Adjust park brake linkage.

Adjusting Park Brake

MX21773

1. With the brake (pedals) properly adjusted (but not actuated), adjust clevis (A) of the park brake linkage so there is 2 clicks of free play in the linkage.

2. The park brake lever (B) should begin to lock at 3 clicks of lever travel, and the brakes should be fully locked at 6 - 8 clicks.