Specifications

Engine

Manufacturer Yanmar

Model Number 4TNV84-EJKM

Type Diesel

Gross Horsepower 30.1 kW (40.4 hp)

Net Horsepower 28.7 kW (38.5 hp)

PTO Horsepower 26.1 kW (35 hp)

Rated Engine Speed 2700 rpm

Operating Range 925 - 2920 rpm

Engine Torque @ Rated Speed 101.4 N·m (74.8 lb-ft)

Maximum Torque 126.8 N·m (93.5 lb-ft)

Displacement 2.0 L (121.7 cu in.)

Cylinders 4

Bore and Stroke 84 x 90 mm (3.31 x 3.54 in.)

Compression Ratio 18:1

Lubrication Pressurized

Cooling System Water Pump

Oil Filter Single Element

Air Cleaner Dry Type with Safety Element

Starting Aid Air Heater

Electrical System

Type 12 Volt

Battery Size 650 Cold Cranking Amps at -18°C (0°F)

Alternator 20 Amp

Starter Size 2.0 kW (2.7 hp)

Fuel System

Fuel Filter Replaceable Element

Fuel Diesel

Fuel Pump In-Line with Electric Shutoff

Fuel Delivery Direct Injection, Self Bleeding

Fuel Tank Capacity 32 L (8.5 gal)

Fuel Consumption (At Rated Engine Speed and 75% Load 6.36 L/hr (1.68 gal/hr)

Drive Train

Transmission Collar Shift

Number Of Speeds 9 Forward, 3 Reverse

MFWD Available Yes

Capability for MFWD All Ranges

Rear Final Drive Type Planetary Gear

Differential Lock Mechanical

Brakes Type Wet Disk

Steering Power, Cylinder-Assisted

Main Clutch Disk Type 2 Stage Dry

Main Clutch Disk Diameter 225 mm (8.9 in.)

Front Axle Operating Capacity 2500 kg (5513 lb)

Rear Axle Operating Capacity 2400 kg (5292 lb)

Drawbar Tongue Capacity 374 kg (825 lb)

Hydraulic System

Type of System Open Center

Power Steering Standard

Pump Type Dual Gear

Working Pressure 15582 kPa (2262 psi)

Pump Capacity (Main) at Rated Speed 32.0 L/min (8.5 gpm)

Pump Capacity (Power Steering) at Rated Speed 17.0 L/min (4.5 gpm)

3-Point Hitch

Type Category 1

Lift Capacity (24-in. behind link arms) 714 kg (1573 lb)

Lift Control Type Position

PTO

Type Continuous Live

Clutch Type Dry Disk

Speed (PTO rpm at Rated Engine Speed) 540 rpm

Mid PTO Available No

Fluid Capacities

Fuel Tank 32 L (8.5 gal)

Cooling System 5.8 L (6.1 qt)

Engine Crankcase w/ Filter 5.3 L (5.6 qt)

Transmission and Hydraulic System 21 L (5.5 gal)

Front Axle 2.1 L (2.25 qt)

Ground Speeds

(Travel speeds at full engine RPM, equipped with 14.9-24 R-1 rear tires. Travel speeds 2% slower with 17.5-24 R-4 tires, 11% slower with 44x18.00 R-3 tires.)

Forward Gears

1st Gear 1.6 km/hr (1.0 mph)

2nd Gear 2.2 km/hr (1.3 mph)

3rd Gear 2.8 km/hr (1.7 mph)

4th Gear 5.2 km/hr (3.3 mph)

5th Gear 7.3 km/hr (4.5 mph)

6th Gear 9.3 km/hr (5.8 mph)

7th Gear 10.8 km/hr (6.7 mph)

8th Gear 15.0 km/hr (9.3 mph)

9th Gear 19.1 km/hr (11.9 mph)

Reverse Gears

1st Gear 1.8 km/hr (1.1 mph)

2nd Gear 6.0 km/hr (3.7 mph)

3rd Gear 12.4 km/hr (7.7 mph)

Dimensions

Wheelbase 1750 mm (68.9 in.)

Overall Length w/ 3-Point Hitch 3128 mm (123 in.)

Overall Height (To Top of ROPS) 2137 mm (84.2 in.)

Overall Height (To Top of Hood) 1373 mm (54.0 in.)

Weight

(includes ROPS, 3-Point Hitch, and R-1 tires)

2WD 1340 kg (2954 lb)

MFWD 1440 kg (3175 lb)

Tires

2WD

Front 6.5-16

Rear 14.9-24

MFWD

Front 8-16

Rear 14.9-24

Wheel Tread Width

(center-to-center with standard tires)

2WD

Front 1223 mm (48.2 in.)

Rear 1174 mm (46.2 in.)

MFWD

Front 1362 mm (53.6 in.)

Rear 1174 mm (46.2 in.)

Recommended Lubricants

Engine Oil John Deere Plus-50® SAE15W-40
or TORQ-GARD SUPREME® SAE5W-30

Grease John Deere NON-CLAY HIGH Temperature EP® - JDM J13E4, NLGI Grade 2

Transmission Oil Low Viscosity HY-GARD® (JDM J20D)

MFWD Front Axle Oil John Deere GL-5, SAE 80W-90

NOTE: Specifications and design subject to change without notice.