
Safety Labels
Understanding The Machine Safety Labels
The machine safety labels shown in this section are placed in important areas on your machine to draw attention to potential safety hazards.
On your machine safety labels, the words DANGER, WARNING, and CAUTION are used with this safety-alert symbol. DANGER identifies the most serious hazards.
The operator’s manual also explains any potential safety hazards whenever necessary in special safety messages that are identified with the word, CAUTION, and the safety-alert symbol.
DANGER
M146238
Picture Note: Located on front side of bagger hopper.
Bagger may impair rear vision, look down and behind before and while backing.
WARNING - CAUTION
M151187
Picture Note: Located on rear side of bagger hopper.
To avoid injury from thrown objects, keep bystanders away. Shut off engine before opening hopper top. Keep chutes in place. Never allow riders on hopper top or on frame.
To avoid injury, ballast per operator’s manual. Bag is subject to wear and deterioration, check bag frequently and replace, as necessary, with a John Deere bag or equivalent to comply with safety specifications.
CAUTION
GC00215
Picture Note: Three located on rear of bags.
• Bag is subject to wear and deterioration.
• Check bag frequently, replace when necessary.
• Use John Deere bag or equivalent to comply with safety specifications.
|