Safety Labels
Safety Label Location
A - WARNING FOLDING ROPS LVU23360
B - CAUTION HEARING PROTECTION - SU20277
Pictorial Safety Signs
At several important places on this machine safety signs are affixed intended to signify potential danger. The hazard is identified by a pictorial in a warning triangle. An adjacent pictorial provides information how to avoid personal injury. These safety signs, their placement on the machine and a brief explanatory text are shown in this Safety section.
There can be additional safety information contained on parts and components sourced from suppliers that is not reproduced in this operator’s manual.
CAUTION SU20277
• Prolonged exposure to loud noises can cause impairment or loss of hearing.
• Wear suitable hearing protection.
WARNING LVU23360
AVOID AMPUTATION
• Hands or fingers may be pinched between folded ROPS and rear implements. Do not place hands or fingers near foldable ROPS when implements are raised.
WARNING KEEP RIDERS OFF - LVU13286
CAUTION KEEP RIDERS OFF
• Only allow the operator on the machine. Keep riders off.
• Riders on the machine may be struck by foreign objects or thrown off the machine causing serious injury.
• Riders obstruct the operator’s view resulting in the machine being operated in an unsafe manner.
WARNING AVOID CRUSHING
• Keep Rollover protective Structure fully extended.
• Do not jump if machine tips.
• When structure must be down:
CAUTION READ OPERATOR’S MANUAL
1. Read Operator’s Manual before operating this machine.
3. Hitch towed loads only to drawbar to avoid rearward upset.
4. Make certain everyone is clear of machine before starting engine or operation.
5. Keep all riders off machine and equipment.
6. Keep hands, feet and clothing away from power-driven parts.
7. Reduce speed when turning or applying individual brakes or operating around hazards on rough ground or steep slopes.
8. Couple brake pedals together for road travel.
9. Use flashing warning lights on highway unless prohibited by law.
10. Stop engine, lower implement to ground and shift to “PARK” or set brake(s) securely before dismounting.
11. Wait for all movement to stop before servicing machinery.
12. Remove key if leaving machine unattended.
ROLL-OVER PROTECTIVE STRUCTURE
Additional, alterations, cracking, damage or corrosion may adversely affect the performance of the ROPS.
To maintain operator protection and ROPS certification:
• Replace damaged ROPS, do not repair or revise.
• Any alteration of ROPS must be approved by manufacturer.
Tested in accordance with: 86/298/EEC
Deemed to comply with: AS 1636.2
