Storage

Storing the Attachment

c CAUTION: Avoid injury! Plugging spoons and tines are sharp. Wear gloves and handle with care. Store attachments so sharp parts are shielded from contact.

1. Park tractor safely. (See Parking Safely in the SAFETY section.)

2. Remove all weight and material from attachment.

3. Remove attachment from tractor.

4. Wash attachment thoroughly. Allow to dry completely.

5. Replace all worn, damaged, or missing parts.

6. Sand any rusted areas lightly and paint with enamel.

7. Lubricate moving parts.

8. Apply a light coverage of oil to all tines and plugging spoons to prevent rust.

9. Reduce air pressure in tires.

10. Store attachment in a dry area with tines against wall or floor to avoid accidental contact.

11. Block up attachment off the ground to prevent contact with moisture and take weight of the tires.

12. Place a waterproof cover over the attachment if it must be stored outside.

Removing the Attachment from Storage

c CAUTION: Avoid injury! Plugging spoons and tines are sharp. Wear gloves and handle with care. Store attachments so sharp parts are shielded from contact.

1. Wash the attachment if necessary. Allow to dry completely.

2. Inspect tires for deterioration.

3. Inflate tires to proper pressure.

4. Make sure all parts are in place and hardware is secure.