Specifications

Engine Specifications

Make Kawasaki

Model:
CS FE250D
CX FE290D

Type Gasoline Air Cooled

Power:
CS 5.89 kW (7.9 hp)
CX 7.46 kW (10 hp)

Fast Idle 3850 rpm

Slow Idle 1125 rpm

Cylinders 1

Cycles 4

Air Cleaner Replaceable, Paper Element

Lubrication:
CS Splash System
CX Fully Pressurized System

Ignition Solid State

Armature Air Gap 0.3 mm (0.012 in.)

Type NGK BPR5ES

Spark Plug Gap 0.7 - 0.8 mm (0.027 - 0.031 in.)

Electrical System

Type 12 Volt

BCI group U-1

Battery Size 160 Cold Cranking Amps @ -18°C (0°F)

Alternator 15 Amp

Fuel System

Fuel Filter Replaceable Element

Fuel Gasoline (minimum 87 octane)

Drive Train

Type:
CS Continuous Variable Transmission (CVT)
CX Continuous Variable Transmission (CVT) with Mechanical Differential Lock

Speeds

Travel Speeds (Forward) 0 - 24 km/hr (0 - 15 mph)

Travel Speeds (Reverse) 0 - 16 km/hr (0 - 10 mph)

Steering and Brakes

Brakes Mechanically Operated Internal Wet Disk

Steering Rack and Pinion

Capacities

Fuel Tank 11.3 L (3.0 gal)

Crankcase:

Without Filter 0.9 L (0.95 qt)

With Filter 1.1 L (1.2 qt)

Transaxle 2.8 L (3 qt)

Cargo Box 182 kg (400 lb)

Towing 273 kg (600 lb)

Payload 364 kg (800 lb)

Dimensions

Width (overall) 1.25 m (49.0 in.)

Length (overall) 2.43 m (95.7 in.)

Height (overall) 1.12 m (43.9 in.)

Weight (includes fuel/fluids):
CS 296 kg (653 lb)
CX 303 kg (669 lb)

Ground Clearance (under transaxle) 12.1 cm (4.8 in.)

Tires

Turf

Size

Front 18 x 8.5-8

Rear 20 x 10.0-8

Inflation Pressure

Front 69 kPa (10 psi)

Rear 69 kPa (10 psi)

Knobby

Size

Front 18 x 8.5-8

Rear 20 x 11.0-8

Inflation Pressure

Front 48 kPa (7 psi)

Rear 48 kPa (7 psi)

Recommended Lubricants

Engine Oil John Deere PLUS-4 SAE 10W-40

John Deere TURF-GARD SAE 10W-40

Grease John Deere Multi-Purpose SD Polyurea Grease

John Deere Multi-Purpose HD Lithium Complex Grease

Transmission Oil John Deere Low Viscosity HY-GARD (JDM J20C)

(Specifications and design subject to change without notice.)