Troubleshooting

If you are experiencing a problem that is not listed in this chart, see your authorized dealer for service.

When you have checked all the possible causes listed and you are still experiencing the problem, see your authorized dealer.

Broom


If	Check
Material Piles Up In Front Of Broom	Decrease travel speed. Run engine at full throttle. Make more than one pass. Adjust brush contact area. Increase broom angle.
Brush Wears Unevenly	Inflate tires to correct pressure. Adjust brush contact area.
Driveline Wearing Prematurely	Decrease tractor travel speed. Make more than one pass in deep, heavy materials. Avoid ramming piles of material. Lack of lubrication–maintain service intervals.
Chain Jumping (clicking noises)	Tighten compression spring.