Service Intervals
Servicing Your Machine
IMPORTANT: Avoid damage! Operating in extreme conditions may require more frequent service intervals:
· Engine components may become dirty or plugged when operating in extreme heat, dust or other severe conditions.
· Engine oil may lose efficiency if vehicle is operated constantly at slow or low engine speeds or with frequent short trips.
|
Please use the following timetables to perform routine maintenance on your machine.
Break In
After First 8 Hours:
· Check and tighten wheel bolts to correct torque.
· Check brake fluid level.
After First 50 Hours:
· Change engine oil and filter.
Every 50 Hours
· Lubricate drive line (AWD).
· Check brake fluid level.
· Check transaxle oil level.
Every 200 Hours or Annually (whichever comes first)
· Change engine oil and filter.
· Change fuel filter.
· Check air cleaner dust unloading valve.
· Clean radiator.
· Check drive belt condition.
· Check driven clutch wear buttons.
· Clean primary drive clutch.
· Inspect battery. Clean if necessary.
· Check and tighten wheel bolts to correct torque.
· Check and tighten all hardware.
Every 800 Hours
· Adjust engine valve clearance (see your John Deere dealer for this service).
Every 800 Hours or 24 Months (whichever comes first)
· Change transaxle oil.
· Change AWD oil.
· Replace drive belt.
Every 1000 Hours or 24 Months (whichever comes first)
· Change engine coolant.
|