Storage
Storing
1. Remove the material collection system.
2. Empty and clean the hopper, chute, and POWER FLOW.
3. Remove any ballast used during bagging. This will ensure proper operation of the tractor when the material collection system is not installed.
4. Replace missing or damaged parts. Make sure all hardware is secure.
5. Paint scuffed metal surfaces to prevent rust.
IMPORTANT: Avoid damage! Hopper should be stored on a non-abrasive surface to prevent scratching the hopper case. |
6. If possible, store the hopper, chute, and POWER FLOW in a cool, dark place and on a non-abrasive surface. If these parts must be stored outside, put a weather-proof cover over them.
7. Fold the grass bags flat or hanging them upside down away from pests and out of the weather.
Removing From Storage
1. Remove material collection system from storage. Clean if necessary.
2. Check bags for signs of deterioration or damage. Replace as needed.