Specifications

Engine - iTorque™ Power System

X300 and X304

Make iTorque™ Power System - Kawasaki

Model Number FH491V

Bore 68 mm (2.68 in.)

Stroke 65 mm (2.56 in.)

Displacement 472 cm3 (28.8 cu in.)

Cylinders 2 (V-Twin)

Cycle Four

Ignition Coil Air Gap 0.25 - 0.40 mm (0.010 - 0.016 in.)

Valve Clearance (Intake and Exhaust) (Cold) 0.075 - 0.125 mm (0.003 - 0.005 in.)

Spark Plug Gap 0.75 mm (0.030 in.)

Spark Plug Torque 15 N•m (11 lb-ft)

X320 and X324

Make iTorque™ Power System - Kawasaki

Model Number FH661V

Bore 75.2 mm (2.96 in.)

Stroke 76 mm (2.99 in.)

Displacement 675 cm3 (41.2 cu in.)

Cylinders 2 (V-Twin)

Cycle Four

Ignition Coil Air Gap 0.25 - 0.40 mm (0.010 - 0.016 in.)

Valve Clearance (Intake and Exhaust) (Cold) 0.075 - 0.125 mm (0.003 - 0.005 in.)

Spark Plug Gap 0.75 mm (0.030 in.)

Spark Plug Torque 20 N•m (15 lb-ft)

X340

Make iTorque™ Power System - Kawasaki

Model Number FH721V

Bore 75.2 mm (2.96 in.)

Stroke 76 mm (2.99 in.)

Displacement 675 cm3 (41.2 cu in.)

Cylinders 2 (V-Twin)

Cycle Four

Ignition Coil Air Gap 0.25 - 0.40 mm (0.010 - 0.016 in.)

Valve Clearance (Intake and Exhaust) (Cold) 0.075 - 0.125 mm (0.003 - 0.005 in.)

Spark Plug Gap 0.75 mm (0.030 in.)

Spark Plug Torque 20 N•m (15 lb-ft)

Drivetrain

Transaxle Kanzaki, Variable Speed Hydrostatic

Model X300, X304 K46

Model X320, X324, and X340 K58

Fuel System

Fuel Types (Recommended):

Regular Grade 87 Octane Unleaded Fuel

Ethanol Blended Fuel (Up to 10%)

MTBE Reformulated Fuel (Up to 15%)

Fuel Filter Replaceable - paper element

Fuel Pump Pulse

Fuel Delivery Carburetor

Electrical System

Battery Type 12 Volt

Cold Cranking Capacity 195 Amps

Tires

Front (X300, X304, X324) 15x6.00-6

Front (X320, X340) 15x6.50-8

Rear (X300) 20x10.00-8

Rear (X304, X324) 20x10.00-10

Rear (X320, X340) 22x11.00-10

Inflation - Front 97 kPa (14 psi)

Inflation - Rear 69 kPa (10 psi)

Capacities

Crankcase with oil filter (X300 and X304) 1.7 L (1.8 qt)

Crankcase with oil filter (X320, X324, and X340) 1.9 L (2.1 qt)

Fuel 13.2 L (3.5 gal)

Travel Speeds at Full Engine RPM

X300 and X304

Forward 0-8.9 km/h (0-5.5 mph)

Reverse 0-6.4 km/h (0-4.0 mph)

X320 and X340

Forward 0-9.3 km/h (0-5.8 mph)

Reverse 0-5.6 km/h (0-3.5 mph)

X324

Forward 0-8.9 km/h (0-5.5 mph)

Reverse 0-5.6 km/h (0-3.5 mph)

Dimensions

X300

Height 109 cm (43 in.)

Overall Width (without mower deck) 97 cm (38 in.)

Length (Overall) 173 cm (72 in.)

X304

Height 109 cm (43 in.)

Overall Width (without mower deck) 104 cm (41 in.)

Length (Overall) 173 cm (72 in.)

X320

Height 109 cm (43 in.)

Overall Width (without mower deck) 104 cm (41 in.)

Length (Overall) 173 cm (72 in.)

X324

Height 109 cm (43 in.)

Overall Width (without mower deck) 98 cm (38.5 in.)

Length (Overall) 173 cm (72 in.)

X340

Height 109 cm (43 in.)

Overall Width (without mower deck) 98 cm (38.5 in.)

Length (Overall) 173 cm (72 in.)

Machine Weights:

X300 (Tractor only - Full of fuel) 225 kg (495 lb)

X304 (Tractor only - Full of fuel) 263 kg (580 lb)

X320 (Tractor only - Full of fuel) 258 kg (568 lb)

X324 (Tractor only - Full of fuel) 274 kg (605 lb)

X340 (Tractor only - Full of fuel) 258 kg (568 lb)

Deck Weights:

38 Edge™ Xtra Mower 34 kg (74 lb)

42 Edge™ Xtra Mower 33 kg (73 lb)

42 Edge™ Mulch Mower 37 kg (81 lb)

48 Edge™ Xtra Mower 51 kg (112 lb)

54 Edge™ Xtra Mower 69 kg (153 lb)

38 Edge™ Xtra Mower

Cutting Width 97 cm (38 in.)

Blades-Rotary .2

Blade Nut Torque 62 N•m (46 lb-ft)

Cutting Height (Approximately) 25 - 102 mm (1 - 4 in.)

42 Edge™ Xtra Mower

Cutting Width 1.07 m (42 in.)

Blades-Rotary .2

Blade Nut Torque 68 N•m (50 lb-ft)

Cutting Height (Approximately) 25 - 102 mm (1 - 4 in.)

42 Edge™ Mulch Mower

Cutting Width 1.07 m (42 in.)

Blades-Rotary .2

Blade Nut Torque 68 N•m (50 lb-ft)

Cutting Height (Approximately) 25 - 102 mm (1 - 4 in.)

48 Edge™ Xtra Mower

Cutting Width 1.22 m (48 in.)

Blades-Rotary .3

Blade Bolt Torque 68 N•m (50 lb-ft)

Cutting Height (Approximately) 25 - 102 mm (1 - 4 in.)

54 Edge™ Xtra Mower

Cutting Width 1.37 m (54 in.)

Blades-Rotary .3

Blade Bolt Torque 68 N•m (50 lb-ft)

Cutting Height (Approximately) 25 - 102 mm (1 - 4 in.)

Recommended Lubricants

Engine Oil TURF-GARD® OR PLUS-4®

Grease:

John Deere MOLY HIGH TEMPERATURE EP GREASE

John Deere Multi-Purpose SD Polyurea Grease

John Deere Multi-Purpose HD Lithium Complex Grease

(Specifications and design subject to change without notice.)