Specifications

Engine Specifications

Make Yanmar 3TNV70

Type Diesel

Displacement 0.854 L (52.11 cu in.)

Cylinders 3

Bore 70 mm (2.75 in.)

Stroke 74 mm (2.91 in.)

Intake and Exhaust Valve Clearance 0.20 mm (0.008 in.)

Strokes/Cycle 4

Oil Filter Spin On Filter

Air Cleaner Replaceable, Paper Elements

Cooling Liquid

Drive Train

Type Belt-Driven Torque Converter With Gear-Driven Transaxle

Gear Ranges Forward HI and LO - Neutral - Reverse

Travel Speeds (Forward HI) 48 km/h (30 mph)

Travel Speeds (Forward LO) 24 km/h (15 mph)

Travel Speeds (Reverse) 27 km/h (17 mph)

Electrical System

Type 12 Volt

Battery Size 480 Cold Cranking Amps @ -18˚C (0˚F)

Alternator 40 amp, regulated

Fuel System

Fuel Filter Replaceable Element

Fuel diesel

Fluid Capacities

Fuel Tank 20.1 L (5.3 gal)

Crankcase (with filter) 2.2 L (2.3 qt)

4WD Front Differential 150 ML (5 oz)

Transaxle 3.8 L (4.0 qt)

Cooling system (Including recovery tank) 5.0 L (5.2 qt)

Steering and Brakes

Steering Rack and Pinion

Service Brake Hydraulically Operated Four Wheel Disk

Hand Brake Hand-Applied Mechanical Drive Line

Tires

AT489

Front 25 x 10.0-12

Rear 25 x 11.0-12

All Trail II

Front 25 x 9.0-12

Rear 25 x 11.0-12

Inflation Pressure

Front and Rear (AT489 Tires) 97 kPa (14 psi)

Front and Rear (All Trail II Tires) 97 kPa (14 psi)

Dimensions

Width (overall) 1.5 m (59.3 in.)

Length (with bumper) 2.87 m (113.0 in.)

Height (overall) 1.89 m (74.4 in.)

Weight (includes fuel/fluids) 695 kg (1532 lb)

Gross Vehicle Weight Rating (includes fuel/fluids) 1415 kg (3120 lb)

Ground Clearance 26.7 cm (11.0 in.)

Cargo Box Capacity 408 kg (900 lb)

Towing Capacity (Not to exceed actual vehicle payload) 590 kg (1300 lb)

Recommended Lubricants

Engine Oil John Deere PLUS-50™

John Deere Torq-Gard Supreme™

Grease John Deere Multi-Purpose SD Polyurea Grease

John Deere Multi-Purpose HD Lithium Complex Grease

Transmission Oil (Transaxle) John Deere HY-GARD™ (JDM J20C)

Transmission Oil (4WD Front Differential) John Deere Low Viscosity HY-GARD™ (JDM J20D)

(Specifications and design subject to change without notice.)

Fast Idle Engine Speed

XUV 3700 +/- 25 r/min

Sound Measurements

Averaged Sound Level at Work Station According to 77/311/EEC Annex II

XUV 85 +/-1 dB(A) at 7.5 km/hr

Sound Power According to ISO 3744

XUV 104.9 dB(A) re: 1 pW at 3725 r/min engine speed

Vibration Measurements - Declared vibration emission value in accordance with EN12096.

Hand/Arm Vibration

Measured vibration emission value is below 2.5 m/s2

Values determined according to EN 1032

Whole Body Vibration

Measured vibration emission value is below o.5 m/s2

Values determined according to EN 1032

NOTE: The value listed above represents the weighted root means square acceleration to which the whole body is subjected on a representative machine during simulated transport conditions. The acceleration value depends upon the roughness of the ground, the speed at which the machine is operating and the operator weight and driving habits. Measurements were obtained through simulated data according to STD Procedure in EN1032.