Service Intervals
Servicing Your Machine
IMPORTANT: Avoid damage! Operating in extreme conditions may require more frequent service intervals:
· Engine components may become dirty or plugged when operating in extreme heat, dust or other severe conditions.
· Engine oil may lose efficiency if vehicle is operated constantly at slow or low engine speeds or with frequent short trips.
|
Please use the following timetables to perform routine maintenance on your machine.
Break In
After First 5 Hours:
· Check and tighten hardware.
· Check tire pressure.
· Check engine oil level.
· Clean radiator screen.
· Check air intake tube.
After First 10 Hours:
· Check and tighten wheel bolts to correct torque.
After First 25 Hours:
· Change engine oil and filter.
Every 50 Hours
· Check tire pressure.
· Clean operator's station and engine compartment.
· Check coolant level.
· Check and tighten hardware.
· Check drive belt condition. HPX Trail Gator 4x4: Check every 200 hours or annually.
· Inspect battery. Clean if necessary.
· Clean front grille.
· Check air intake.
· Lubricate drive line.
· Check brake fluid level.
Every 100 Hours
· Check transaxle oil level.
· Check air cleaner dust unloading valve.
· Check air cleaner element.
· Check spark plug.
· Check wear pads on driven clutch. HPX Trail Gator 4x4: Check every 200 hours or annually.
Every 200 Hours or Annually (whichever comes first)
· Check and tighten wheel bolts to correct torque.
· Change engine oil and filter.
· Change air cleaner element.
· Change fuel filter.
· Clean primary drive clutch.
· HPX Trail Gator 4x4: Check drive belt condition.
· HPX Trail Gator 4x4: Check wear pads on driven clutch.
· Adjust engine valve clearance. (See your John Deere dealer for this service.)
Every 500 Hours or 24 Months
· Replace drive belt.
· Change engine coolant.
· Check spark arrestor.
Every 800 Hours or 24 Months (whichever comes first)
· Change transaxle oil.
· Change AWD oil.
|