Lubrication and Maintenance Procedures

CAUTION: Do not clean, lubricate or adjust the machine while it is moving.

IMPORTANT: The recommended maintenance intervals are based on normal operating conditions; in severe or unusual conditions it may be necessary to lubricate more frequently.

Perform the lubrication and maintenance procedures indicated in this section at the start and end of each season.

Clean the grease fittings before using a grease gun. Replace any missing or damaged grease fittings immediately. If the new grease fitting does not accept grease, remove it and inspect the adjacent parts for failures.

Proper lubrication of the planter at each point (A) at the 10-hour intervals pointed out in this manual, using the grease and/or oil recommended, will prolong the service life of your machine. Failure to perform the above may result in failures as well as loss of time and money.