Make sure all the parts are applied with grease and oil properly.
Make sure nuts and bolts are tightened properly.
Field should be well prepared and levelled prior to sowing.
Ensure the drive chains are properly tightened.
Ensure all the seed and fertilizer tubes are properly cleaned
and there is no blockage in the tubes. Also ensure all the tubes are
properly inserted into tine pipes.
Clean fertilizer and seed boxes and close the clean out slots.
Ensure the seed rate and fertilizer rate adjusting levers are
working smoothly by rotating.
Check the drive wheel spring tension and check it’s free
rotation.
Check tension and position of seed covering devices and row
marker.
Adjust the distance between front and rear tines as per desired
row spacing and ensure that the tines placed at equidistant.