Verify Spinner Fin Installation

N97834
N97834-UN-04APR12

Left-Hand Spinner Disc

N97835
N97835-UN-04APR12

Right-Hand Spinner Disc

Verify the following:

  • Gusset faces counter-clockwise for left-hand disc.
  • Gusset faces clockwise for right-hand disc.

N97836
N97836-UN-04APR12

A - Left-Hand

B - Right-Hand

  • Two opposing fins in position 1 and two opposing fins in position 2.

IMPORTANT:

N97838
N97838-UN-04APR12

Detail of Cap Screw Position

A - Cap Screws and Lock Nuts (Head on Top Side of Disc)

B - Cap Screw and Lock Nut (Head on Bottom Side of Disc)

Cap screw (B) must be installed with head of bolt on bottom side of disc for the speed sensor. Incorrectly installed hardware will result in machine damage.

NOTE: Spinner speed sensor will not work if stainless steel hardware is used for cap screw (B).

Hardware must be installed as shown.

OUO6435,00007A9-19-20120531