Predelivery

After machine has been completely assembled, inspect to be sure it is in good running order before delivering to customer. The following checklist is a reminder of points to inspect. Check off each item as it is found satisfactory or after proper adjustment is made.

□ SMV emblem installed; protective shipping tape removed from reflectors and lights are installed.

□ All grease fittings have been lubricated. (See LUBRICATION AND MAINTENANCE section in Operator's Manual.)

□ Inspect to be sure all nuts have been tightened to proper torque and all cotter pins spread.

□ Tires are properly inflated. Tighten wheel bolts to specified torque.

□ Make sure Fertilizer Coulters are properly adjusted.

□ Warning lights are properly installed and operational.

□ Make sure all customer-ordered attachments have been installed or are available for delivery.

□ Any parts scratched in shipment have been touched up with paint.

□ Remove all shipping decals.

□ This machine has been thoroughly checked and to the best of my knowledge is ready for delivery to the customer.

□ Verify transport pins are inserted in transport hole.

Signed:_________________________

Date:_________________________