Attaching Tractor With Quick-Coupler (Two-Point Hitch Only)

A62486-UN-29APR08

A - Hitch Pins

B - Parking Stands

NOTE: Before attaching machine to tractor, be sure hitch pins and spacers are completely assembled to match the hitch configuration of your tractor.

1. Lower coupler to allow jaws to pass under machine hitch pins (A).

2. Back tractor into position. Raise couplers to firmly seat coupler jaws.

3. Lock latch levers on tractor. The spring loaded latches in the lower coupler jaws must be extended above hitch pins.

4. Raise parking stands (B) and pin in transport position.