Track Sensor Setup

Set Track Sensor Source

1. 
   A63046-UN-13AUG08

   Setup Icon

   
   A63026-UN-13AUG08

   Next Page

   
   A63065-UN-14AUG08

   Sensor Type

   A - Drop Down Menu

   Select Menu button >> select Drill Application icon >> select Function Toggle until icon set 2 is displayed >> select Setup icon >> select Next Page icon.

---




2. NOTE: Only drill drive wheel and tractor radar require calibration. Other sensor sources are determined automatically.

   Select drop down menu (A) and set source of track sensor.

Calibrate Track Sensor

1. 
   A63064-UN-14AUG08

   
   A63046-UN-13AUG08

   Setup Icon

   A - Start and Stop

   B - Input Box

   Select Menu button >> select Drill Application icon >> select Function Toggle until icon set 2 is displayed >> select Setup icon.

---




2. Select start (A) and drive tractor 100 m (328 ft.).

3. When complete, stop tractor and select stop (A). Drive wheel pulses are displayed in input box (B).

4. Select input box (B) to manually enter drive wheel pulses.