Calibration Chart—Normal Seed (Approximate Values)

IMPORTANT: These tables are for manual calibration. If meter is controlled through an ISOBUS monitor, see Seed Calibration in the ISOBUS Seed Drill Monitor System section to calibrate the meter.

NOTE: Verify that the rapeseed brush is removed before sowing normal seeds. See Remove and Install Rapeseed Brush in Operating the Machine section for removal of the brush.

Seed	Wheat	Rye	Barley	Oats	Beans	Peas	Lupins	Vetches	Maize	Grass
Specific Gravity (kg/l)	0.77	0.74	0.68	0.5	0.85	0.81	0.76	0.83	0.79	0.36
Meter Setting	Normal Seed kg/ha (Set Butterfly Valve and Changeover Switch to “N” Position. Use Normal Speed Gear)
101	34	33	32	24	23	21	28	32	8	—
151	51	49	48	35	42	40	45	51	24	18
201	69	66	64	47	61	59	62	70	47	26
251	86	83	79	59	79	78	79	89	70	34
30	104	100	95	71	98	97	96	108	92	42
35	122	117	111	82	116	117	113	127	115	50
40	140	134	127	94	135	136	130	146	137	—
45	157	151	143	106	154	155	147	165	156	—
50	174	168	159	118	172	174	164	184	175	—
55	192	184	174	130	191	194	181	203	194	—
60	210	200	190	141	209	213	198	222	212	—
65	228	217	206	153	228	232	216	241	231	—
70	246	235	222	165	246	251	234	260	249	—
75	264	252	238	177	265	270	251	279	267	—
80	281	269	253	189	283	289	268	298	285	—
85	298	286	268	200	302	309	285	317	304	—
90	316	302	284	212	320	328	302	336	323	—
95	335	319	300	224	338	347	320	355	342	—
100	352	337	316	236	356	366	337	374	361	—
105	370	354	332	248	374	385	354	393	380	—
110	387	371	348	260	393	404	371	412	398	—