Install Frame Quik-Tatch™ Weights On Wings (Two-Rank Machines ONLY)

CAUTION: Each Quik-Tatch™ weight weighs 45.4 kg (100 lb). Use proper lifting equipment to avoid personal injury when installing.

IMPORTANT: Additional weight may be needed when working in hard soil conditions.

A37835
A37835-UN-31AUG95

Wing Frame

A - Center Weights

B - Hardware

Quik-Tatch™ weights are attached to wing ends to improve opener penetration. Each wing can hold up to six weights.

  1. Place two center weights (A) on frame, one on each side of welded pin.

  2. Install equal number of weights on both sides of center weights and attach with tie bolt hardware (B).

    Wing Section Hardware

    Description (Part Number)

    Quantity Required

    Lock Nut (K40015)

    4

    5/8 x 8-1/2 in. Grade 8 Cap Screw (08H4248)

    4

    Washer (24M7241)

    8

See your John Deere™ dealer to order Quik-Tatch™ weights and attaching hardware.

Quik-Tatch is a trademark of Deere & Company
John Deere is a trademark of Deere & Company

OUMX005,0001B3F-19-20160222