Check Wheel Bolts and Bearings

IMPORTANT: Check torque on wheel bolts before operation, after initial 10 hours of use and after every 50 hours.

A37885-UN-31AUG95

A - Wheel Bolts

Item	Measurement	Specification
Wheel Bolts	Torque	176 N·m (130 lb·ft)

To adjust wheel bearing proceed as follows:

1. Remove center hub cap and cotter pin.

2. Tighten nut until there is a slight drag on the bearings, while turning wheel.

3. Back off nut until cotter pin can be installed in hole.

4. Replace hub cap.