Remove From Storage

CAUTION: Keep all shields in place. Do not operate machine if any safety shields are missing. Entanglement with rotating parts can cause serious injury or death to you or someone else.

1. Check tire inflation. See Servicing section.

2. Clean the machine thoroughly.

3. Make sure that seed tubes and openers are free of obstruction.

4. Perform required lubrication. See Lubrication and Maintenance section.

5. Check all hardware and tighten as needed.

6. Review operator's manual, giving special attention to safety precautions.

7. Check inside of tanks and remove any obstructions.

8. Lubricate meter drive chains with John Deere™ Multipurpose Spray Lube TY6350 and install. If roller chains have become rusty or stiff during storage, “work” chains while lubricating to ensure that all joints move freely.