Before Use

1. Check tire pressure and inflate as necessary. See Check Tire Pressure and Position in Servicing section.

2. Check wheel bolts and bearings as necessary. See Check Wheel Bolts and Bearings in Servicing section.

3. Inspect for loose, damaged, or missing parts. Repair or replace parts before entering the field.

4. Check the torque of all bolts, u-bolts, and cap screws after the first 10 to 15 hours of operation. Check the torque again at the end of the first week (50 hours) of operation. Torque hardware to the specifications in the Servicing section unless otherwise noted.

5. Perform required lubrication. See Lubrication and Maintenance section.

6. Verify that air and hydraulic hoses do not interfere with moving parts. Relocate hoses and retain with tie straps.