Prepare for Storage

Wings may gradually lower, if pressure is not relieved from wing fold hydraulic cylinders. Temperature increases or sunlight can cause thermal expansion of hydraulic fluid. Always relieve pressure before parking or storing machine.

1. 
   N45734-UN-17NOV93

   Hose and Light Plug Storage

   Clean and store machine on a hard surface in a dry place, if possible. If storing on a soft surface, place a wood board under openers to prevent them from penetrating and resting in the ground.

---




2. Lubricate entire machine. See Lubrication and Maintenance section.

3. Inspect for loose or damaged parts; replace and tighten as required.

4. Repaint scratches as necessary to prevent rust.

5. Coat disks with oil or grease, then lower onto a wood board for storage.

6. Apply grease to exposed areas of hydraulic cylinder rods.

7. Before disconnecting folding cylinder hydraulic hoses, relieve pressure by either positioning SCV lever in “float” position or turn tractor engine off and cycle SCV lever back and forth three times.

8. Place hose ends and warning light plug-in storage positions on hitch.