Remove Air Hose Blockage

1. Determine if blockage is in primary or secondary hose.

2. Raise tool completely and close lockup valve.

3. Primary Hose: Remove primary hose from the affected tower.

4. Shake hose vigorously starting at the air cart until blockage spills from end of hose.

5. Reconnect hose.

6. Continue seeding and observe affected row for product flow.

7. If no seed flow is observed, repeat procedure.

8. Secondary Hose: Remove secondary hose from the affected opener.

9. Shake hose vigorously until blockage spills from the end of the hose.

10. If blockage is not in the secondary hose or the opener, remove the lid from the tower and clear header ring.

11. Reconnect the secondary hose and install the lid if necessary.

12. Continue seeding and observe affected row for product flow.

13. If no seed flow is observed, repeat procedure.