Hydraulic Motor Case Drain Requirements
Avoid hydraulic motor damage. Case drain hose (A) must be attached to a low-pressure drain connection before any hoses are connected. The case drain must have less than 172 kPa (1.72 bar) (25 psi).
A85599-UN-11MAR15
Connect Case Drain First
A - Case Drain Hose
The hydraulic motor used on the blower is a low-flow, high-pressure motor. They are designed to operate on a closed-center hydraulic system only. Connecting the blower to an open-center system is not recommended. See your John Deere dealer or qualified service provider for more information.|
OUO6435,00001FB-19-20170502 |