1890 No-Till Drill Specifications

Type	Drawn frame with floating hitch and hydraulic over-center fold.
Dimensions
Overall length (Hitch Pin-To-Rear of Rear Tire)	7.5 m (24 ft 7 in)
Transport Clearance (Openers-To-Ground)	203 mm (8.0 in)
Rockshaft Spacing (Fore/Aft.)	1341 mm (52.8 in)
Row Spacing	190 mm (7.5 in) or 254 mm (10 in)

Lateral Opener-To-Opener Spacing
7.5 in Models	254 mm (10 in)
10 in Models	381 mm (15 in)

Openers Per Machine
9.1 m (30 ft)	48 at 190 mm (7.5 in) or 36 at 254 mm (10 in)
11 m (36 ft)	58 at 190 mm (7.5 in) or 44 at 254 mm (10 in)
12.2 m (40 ft)	64 at 190 mm (7.5 in) or 48 at 254 mm (10 in)
13 m (42 ft 6 in)	68 at 190 mm (7.5 in) or 50 at 254 mm (10 in)

Downforce per Opener
190 mm (7.5 in) Spacing	75 kg (165 lb) to 181 kg (400 lb)
254 mm (10 in) Spacing	75 kg (165 lb) to 204 kg (450 lb)
Note: Maximum downforce requires addition of Quik-Tatch™ weights to the center frame and wings.

Ballast Weights at 45 kg (100 lb) Each (3-Section Machines)
Center Frame	14 Rear
Wings	6 Each Side

Tires	Inflation Pressure
31 x 13.5-15 12 PR	483 kPa (4.83 bar) (70 psi)
Hydraulic System Working Pressure:	20 684 kPa (206.8 bar) (3000 psi)
Hydraulic System Burst Pressure:	82 737 kPa (827.4 bar) (12 000 psi)
Specifications and design subject to change without notice.