Predelivery service is the service John Deere recommends that a dealer perform on a machine before delivering it to a customer. This includes assembly, adjustment, and test. The service assures that the monitor will be delivered to the customer in good condition and that the customer will be fully satisfied with its performance right from the start.

The illustrations and instructions on the following pages give the proper sequences for John Deere COMPUTER TRAK ® Monitors.

References to right-hand and left-hand sides in these instructions are determined by standing at the rear of the planter and facing in the direction of travel.

On the next page is a Predelivery Check List. This list is a reminder of the points to inspect and test on this monitor and to be sure it has been properly assembled and is in good working condition before delivering it to your customer.

The Delivery Check List is a reminder of items that should be covered when the monitor is delivered to your customer.

The operator's manual, which contains important operating, lubricating and service information, is for your customer. Acquaint the customer with its contents.

After the monitor has been assembled, inspect it thoroughly to be sure it is functioning properly before

The John Deere Delivery Receipt, when properly filled out and signed by the dealer and customer, verifies that the predelivery and delivery services were satisfactorily performed. When delivering this monitor, give the customer a copy of the delivery receipt and the operator's manual. Explain their purpose.

Be certain to retain your copy of the packing list for shipping bundle information.

COMPUTER TRAK is a trademark of Deere & Company.

AG,OUO1074,801 -19-01MAR00-1/1