Preparing COMPUTER TRAK® 150 Monitor

NOTE: One monitor is used for 4-, 6- and 8-row applications.

The consoles come set up for 8-row use. If a 4- or 6-row console is desired, carefully remove the bezel with a small screwdriver.

COMPUTER TRAK is a trademark of Deere & Company.

AG,OUO1074,813 -19-01MAR00-1/5

NOTE: Push and twist lamps counterclockwise for removal.

Remove a lamp (A) from each end for a 6-row monitor.

A-Lamp

AG,OUO1074,813 -19-01MAR00-2/5

Remove two lamps (A) from each end for a 4-row monitor.

A-Lamps

AG,OUO1074,813 -19-01MAR00-3/5

NOTE: (12-row console used on 10-row application) Remove only the two right-hand bulbs.

On 4-, 6- and 8-row monitors, place the switch (A) on inside of console to the correct row number position.

A-Switch

AG,OUO1074,813 -19-01MAR00-4/5

Install proper row number bezel (A).

A-Bezel

AG,OUO1074,813 -19-01MAR00-5/5