Preparing COMPUTER TRAK® 250 Monitor

Constants necessary for making proper calculations with the monitor are row width, number of rows and a distance calibration.

The monitor will default to the SET-UP mode when turned on for the first time, requiring ROW WIDTH and DIST CAL numbers to be entered before proceeding.

Examples throughout the set up procedure assume the planter population is set at 30,000 seeds per acre. All calculations are set in ENGLISH mode.

Seeding Equipment Drill
24 Row
7.5 in.		 Planter
6 Row
30 in.		 Planter
12/23 Row
30/15 in.		 Planter
12/23 Row
30/15
Usage 24 Rows
7.5 in.		 6 Rows
30 in.		 23 Rows
15 in.		 12 Rows
30 in.
Monitor Setup Data
Number of Rows (Sensors) 4 6 23 23
Row Spacing 7.5 in. 30 in. 15 in. 30 in.
Planter Width 180 in.
(7.5 x 24)		 180 in.
(6 x 30)		 345 in.
(23 x 15)		 360 in.
(12 x 30)
Seed Sensors ON ALL ON ALL ON ALL ON 1-3-5-7-9-11-
13-15-17-19
21-23
Seed Sensors OFF       2-4-6-8-10-
12-16-18-20
22

 

COMPUTER TRAK is a trademark of Deere & Company.

AG,OUO1074,817 -19-01MAR00-1/1