Area1. Touch the SETUP SELECT switch (A). The display will show AREA. 2. Touch the DIGIT SELECT switch (B) until the triangle is below the number to be changed. NOTE: The monitor will only show the decimal point up to 999.9. Further area readings will show whole numbers only such as 1000, 1001, 1002, etc. If the decimal point is desired, it will be necessary to start over at 000.0. AREA is used to clear previously accumulated area or preset an area. 3. Touch the 0-9 switch (C) until zero or the desired number is displayed. |
|
AG,OUO1074,821 -19-01MAR00-1/1 |