Distance Count Mode

Distance Count Mode allows the operator to measure off the distance driven based on radar information.

AG,OUO1074,841 -19-01MAR00-1/2

To enter this mode press AREA/SPEED and POP SPACING (A) simultaneously. Speed will also show in the lower display.

To start and stop the distance measure, press the ROW ON/OFF switch (B). To reset distance to zero, press the 0-9 switch (C).

To exit the function, press SCAN, ROW SELECT, AREA/SPEED, POP SPACING or SETUP SELECT.

A-AREA/SPEED and POP SPACING
B-ROW ON/OFF Switch
C-0-9 Switch

AG,OUO1074,841 -19-01MAR00-2/2