30-55 Series Utility Tractors-Console Installation

1. Assemble brackets (A) and attach to window ledge with cap screws (B).

2. Place rubber washer (C) over hole.

3. Attach monitor to bracket.

4. Install monitor harness and radar harness into grommet.

A35578


A-Brackets
B-Cap Screws
C-Rubber Washer

AG,OUO1074,851 -19-01MAR00-1/3

5. Install grommets (A) into rear plate (B) as illustrated.

6. Attach rear plate to cab with six 5/16 x 7/8 in. screws (C).


A-Grommets
B-Rear Plate
C-Screws

A35573

AG,OUO1074,851 -19-01MAR00-2/3

A35961
 

A-Harness

  

7. Install monitor harness (A) as illustrated.

8. Connect monitor power harness to 12 volt power source. If tractor is equipped with a 2-pin

convenience outlet, order AA37254 to convert 2-pin to a 3-pin outlet. If tractor is not equipped with a convenience outlet, order AA37247.

AG,OUO1074,851 -19-01MAR00-3/3