Connect to Seed Tube Sensors (Small and Large)
NOTE: The seed tubes for MAXEMERGE PLUS ® row units are illustrated. If another type seed tube is installed, the instructions are provided with the sensors. 1. Route harness through hole (A) on planting units.
|
|
|
MAXEMERGE PLUS is a trademark of Deere & Company. | AG,OUO1074,870 -19-01MAR00-1/3 |
|
2. Connect harness (A) to seed sensor harness.
|
|
AG,OUO1074,870 -19-01MAR00-2/3 |
|
NOTE: Refer to the harness assembly instructions included with each harness bundle. 3. Coil excess harness (A) between frame and planting unit and fasten with tie bands.
|
|
AG,OUO1074,870 -19-01MAR00-3/3 |