Replacing Marker Breakaway Bolt (1750 Conservation)

The marker breakaway bolt (A) provides breakaway protection when the marker hits an obstacle.

To replace the breakaway bolt, proceed as follows:

A31246

7200OM,4,6WM,W1 -19-29MAY92-1/4

NOTE: Extra shear bolts are located on the inside of each marker door.

Replace broken breakaway bolt with M10 x 100 grade 8.8 bolt (A). Position new bolt in pivot as shown.

A29022

7200OM,4,6WM,W1 -19-29MAY92-2/4

Remove wrench (C) from storage position and remove nut securing large bolt (A) from frame. Install large bolt on breakaway bolt.

NOTE: Be certain flat sides (B) of A45294 bolt are in the slot in pivot.

Attach large bolt with M10 nuts.

A31247

7200OM,4,6WM,W1 -19-29MAY92-3/4

Return marker arm to operating position and insert breakaway bolt through hole in planter frame.

Attach breakaway bolt with M24 nut.

Attach wrench in storage position with spring locking pin.

A31248

7200OM,4,6WM,W1 -19-29MAY92-4/4