Align Coulter with TRU-VEE Opener

The coulter blade should be adjusted to align with the TRU-VEE opener.

Adjust the coulter blade so it is directly in front of the TRU-VEE opener and is not running at an angle to the direction of travel.

To align side-to-side, loosen bolts (A) and slide coulter.

If coulter blade is running at an angle relative to direction of travel, remove bolts (A) and add washers as required between back surface of coulter casting and front of planting unit.

AG,OUOD002,194 -19-23MAR99-1/1