Marker Breakaway Bolt

The marker breakaway bolt (A) provides breakaway protection when the marker hits an obstacle.

To replace the breakaway bolt, proceed as follows:

A33661

720016ROM,SE,I -19-24SEP92-1/4

NOTE: Extra shear bolts are located on the inside of each marker casting.

Replace broken breakaway bolt with M10 x 100 grade 8.8 bolt (A). Position new bolt in pivot as shown.

A33719

720016ROM,SE,I -19-24SEP92-2/4

Remove wrench from storage position and remove nut (C) on large bolt (A) from frame. Install large bolt on breakaway bolt.

NOTE: Be certain flat sides (B) of A45294 bolt are in the slot in pivot.

Attach large bolt with M10 nuts.

A33720

720016ROM,SE,I -19-24SEP92-3/4

Return marker arm to operating position and insert breakaway bolt through hole in planter frame.

Secure breakaway bolt (A) with M24 nut.

Secure wrench in storage position with spring locking pin.

A33721

720016ROM,SE,I -19-24SEP92-4/4