7. Replace the vacuum meter dust cover (A) if it does not fit properly, or is cracked or weathered.

8. Insert the rubber handle (B) and replace if cracked or broken.

9. Inspect plastic insert (C) and chute cover (D) and replace if worn.

10. Inspect flex-drive assembly to make sure drive coupler pivots freely. Disassemble, clean and lubricate with molybdenum disulfied grease if flex drive does not pivot freely.

11. Assemble vacuum meter assembly onto hopper and attach meter with nuts (E).

A-Dust Cover
B-Handle
C-Plastic Insert
D-Chute Cover
E-Nuts

AG,OUOD002,136 -19-15MAR99-1/1