Adjusting Gauge Wheels

To prevent a buildup of dirt or trash between gauge wheels and opener, be certain wheels are positioned correctly against disk blades.

Gauge wheel tires should just touch the blades, or be no more than 1.5 mm (1/16 in.) away from the blades at their closest point.

To move gauge wheel closer to blade, place wrench (A) on inside nut and turn counterclockwise. To move gauge wheel away from blade, turn wrench (A) clockwise.

NOTE: When assembled, gauge wheels and disk blades must be free to turn with minimal resistance.

A39401

OM56570,DF -19-24FEB97-1/1