Coulter/Row Cleaner Height Adjustment1. The function of the row cleaner is to sweep aside residue and not move soil. 2. When using pre-plant incorporated herbicide, the row cleaner depth should be adjusted to minimize soil disturbance so the cleaner will not reduce the effectiveness of the incorporated herbicide.
3. Insert 1/2 in. drive socket tool into square hole (A) of arm. 4. Lift socket tool and remove pin (B). Insert pin (B) in hole at desired height of row cleaner attachment. |
|
CAUTION:
DO NOT USE spacer strap on arm as a handle. Fingers may be seriously injured on sharp edge of coulter blade. Use 1/2 in. square socket tool to adjust height.
OM56578,100,Q -19-20MAY96-1/2 |
|
5. If row cleaner is NOT needed, dependent on conditions, raise row cleaner up and locate pin (A) to highest position. |
|
OM56578,100,Q -19-20MAY96-2/2 |