Installing Knockout Assembly (Sweet Corn)

NOTE: The sweet corn seed knockout wheel (A) is used to insure that certain seed types are fully released from the vacuum hole. The wheel projections engage the vacuum holes, forcing all seeds and foreign material to be ejected.

The seed knockout wheel is required when planting sweet corn seed. Sweet corn seed is typically irregular in shape, creating the potential for the seeds to become lodged in the vacuum hole.

1. Loosen screw (B) and remove wiper assembly (C).

2. Install knockout assembly (D) with hardware (B) loosened in Step 1.

NOTE: When closing dome, make certain the wheel is running in the track on the seed disk.

A-Knockout Wheel
B-Screw
C-Wiper Assembly
D-Knockout Assembly

OM58077,30B -19-08JAN97-1/1