Disk Closing Attachment

Check disk bearing bolts (A) and jam nuts (B) to be sure they are tight. If retightening is necessary:

1. Loosen jam nut (B).

2. With a wrench on the flat surfaces of the bearing bolt, torque bolt to shown specifications.

Specification

Bolt -Torque 203 N·m (150 lb-ft)

3. With wrench on the flats of the bearing bolt to maintain proper torque adjustment of the bolt, torque jam nut to shown specifications.

Specification

Jam Nut -Torque 203 N·m (150 lb-ft)


A-Disk Bearing Bolts
B-Jam Nut

A25755

STACKOM,SE,I -19-22NOV93-1/1