Detaching Machine From Tractor-Seeding Tool or 1900 Tow-Between Cart

causym CAUTION: To help prevent severe injury or death to you or someone else:

Keep all persons away from machine when raising and lowering wings.

Always locate machine on level ground when raising and lowering wings.

Never raise or lower wings when moving.

1. With transmission in "park", start tractor engine and pull SCV No. 1 (A) rearward to raise openers fully.


A-SCV No. 1

N45491

With Mechanical SCV Controls

N48107

With Electro/Hyd SCV Controls

OUO6023,0000153 -19-08DEC00-1/8

2. Move SCV No. 2 (A) rearward to fold wings fully.


A-SCV No. 2

A25573

With Mechanical SCV Controls

N48108

With Electro/Hyd SCV Controls

OUO6023,0000153 -19-08DEC00-2/8

3. Close lock-up valve (A) on seeding tool.

4. Air Drill: Attach hitch jack in storage position with pins.


A-Lock-Up Valve

A43336

OUO6023,0000153 -19-08DEC00-3/8

Tow-Between Cart or Seeding Tool: Remove weight from tractor drawbar using hitch jack (A).


A-Hitch Jack

A41639

Tow Between Cart

N40112

Drill Hitch

OUO6023,0000153 -19-08DEC00-4/8

5. Remove fan motor case drain hose (A) from low pressure drain coupler (B).


A-Case Drain Hose
B-Low Pressure Drain Coupler

A37979
N45535

60 and 70 Series 4WD Tractors

A43330

8000 Series Tractors

A43331

9000 Series Tractors

OUO6023,0000153 -19-08DEC00-5/8

6. (If Wings are Folded) Before disconnecting folding cylinder hydraulic hoses, relieve pressure by either positioning tractor control lever (A) in "float" position (with Electro/Hydraulic SCV Control) or turn tractor engine off and cycle lever back and forth three times (with Mechanical SCV Control).

A25573
N48108

OUO6023,0000153 -19-08DEC00-6/8

causym CAUTION: Serious personal injury can result if you attempt to disconnect hydraulic hoses under pressure.

Mechanical SCV Controls: Shut off tractor engine and work levers back and forth before disconnecting hoses to prevent a sudden accident that could cause severe injury to yourself.

Electro/Hydraulic SCV Controls: Place SCV control in "float" position before disconnecting hoses to prevent a sudden accident that could cause severe injury to yourself.

7. Remove hydraulic hoses (A) and electrical connectors (if equipped) from tractor outlets and cover receptacles. Seeding Tool: Place hoses and cable in storage position on hitch bracket.


A-Hydraulic Hoses

A47094

With Mechanical SCV Controls

N48129

With Electro/Hyd SCV Controls

N45567

Seeding Tool

OUO6023,0000153 -19-08DEC00-7/8

8. Remove safety chain (B).

9. Remove hitch pin (A).

10. Drive tractor away from machine.


A-Hitch Pin
B-Safety Chain

A41633

OUO6023,0000153 -19-08DEC00-8/8