OMA69235: 1860 No-Till Air Drill, Block File: OUO6023_0000188_19

1. Clean dirt from parts prior to removal.

OUO6023,0000188 -19-08DEC00-1/2

A-Cap Screw, 5/8 x 3 in.
B-Cap Screw 5/16 x 1 in., Washer and Lock Nut

C- Cap Screw 5/16 x 1-3/4 in., Washer and Lock Nut

D-Wheel, Outer
E-Bearing

F-Tire
G-Wheel, Inner

2. Remove center cap screw (A) and wheel assembly.

3. Remove hardware (B and C) to disassemble wheel.

4. Inspect parts for wear or damage and replace as necessary.

5. Assemble bearing (E), inner wheel, outer wheel, and tire with previously removed hardware (B and C).

6. Attach wheel to arm using previously removed hardware.

7. Replace Bearing (E).

8. Check clearance between gauge wheel and disk opener. See CHECKING GAUGE WHEEL CLEARANCE-ALL GAUGE WHEELS in this section.

OUO6023,0000188 -19-08DEC00-2/2