1860 No-Till Drill Specifications1

Type 3-Section drawn flexible frame with floating hitch and hydraulic over-center fold.
Dimensions
Overall length (Hitch Pin-To-Rear of Rear Tire) 7.5 m (24 ft 7 in.)
Tranceport Clearance (Openers-To-Ground) 203 mm (8.0 in.)
Rockshaft Spacing (Fore/Aft) 1341 mm (52.8 in.)
Row Spacing 190 mm (7.5 in.) or 254 mm (10 in.)
Lateral Opener-To-Opener Spacing
7.5 in. Models 254 mm (10 in.)
10 in. Models 381 mm (15 in.)
Openers Per Machine
9.1 m (30 ft) 48 at 190 mm (7.5 in.) or 36 at 254 mm (10 in.)
11.2 m (36 ft) 58 at 190 mm (7.5 in.) or 44 at 254 mm (10 in.)
12.2 m (40 ft) 64 at 190 mm (7.5 in.) or 48 at 254 mm (10 in.)
12.9 m (42 ft) 68 at 190 mm (7.5 in.) or 50 at 254 mm (10 in.)
Down-Force per Opener
190 mm (7.5 in.) Spacing 75 kg to 181 kg (165 lb) to (400 lb)
254 mm (10 in.) Spacing 75 kg to 204 kg (165 lb) to (450 lb)
Note: Maximum down-force requires addition of QUIK-TATCH™ weights to center frame and wings.
Ballast Weights at 45 kg (100 lb) Each
Center Frame 14 Front and Rear, 28 Total
Wings 6 Each Side, 12 Total
Note: Ballast weights should not be used on wings when row markers are installed.
Tires
Center Frame and Wings›Standard 11L x 15›10PR I1
Inflation Pressure 303 kPa (44 psi)
Hi-Float›Optional 31 x 13.5-15 8PR
Inflation Pressure 310 kpa (45 psi)

 

QUIK-TATCH is a trademark of Deere & Company

1Specifications and design subject to change without notice.

OUO6023,0000192 -19-08DEC00-1/1