Determining Tractor Requirements

1. See RECOMMENDED TRACTORS in Specifications section.

2. Install adapters, if tractor does not have ISO hydraulic couplers. See your John Deere dealer.

N48100

With Electro/Hyd SCV Controls

RW5836

With Mechanical SCV Controls

OUO6076,000005A -19-08DEC00-1/3

NOTE: If your John Deere tractor is not equipped with a low-pressure drain connection, order installation kit from your John Deere dealer. See LOW PRESSURE DRAIN CONNECTION in this section for kit listing.

3. Tractor MUST be equipped with a low-pressure drain port (A) for connection of fan motor case drain.


A-Low Pressure Drain Port

A43389

8000 Series Tractor

RW56256

9000 Series Tractor

OUO6076,000005A -19-08DEC00-2/3

causym CAUTION: Make sure tractor master shield (A) and driveline guard (B) are in place at all times, to prevent entanglement with rotating PTO shaft. Coming in contact with a rotating PTO shaft can severely injure or kill you.

4. Consult tractor operator's manual for specific adjustment procedures, tire inflation, wheel spacing, and ballast requirements.


A-Master Shield
B-Driveline Guard

RW5854

OUO6076,000005A -19-08DEC00-3/3