Positioning Drawbar

causym CAUTION: Avoid personal injury or death due to losing steering control of machine. Always pin drawbar in center position for ALL tractors, when transporting machine.

NOTE: For four-wheel drive tractors, leave one hole clearance on each side of drawbar for field operation only.

1. Place drawbar in fixed centered position, as close as possible to 457 mm (18 in.) from ground to top of drawbar.

2. Install clevis assembly on top of drawbar (if equipped).

3. Tighten clevis assembly bolts to specification.

Specification

Clevis -Torque 407 N·m (300 lb-ft)

N42074N

OUO6076,000005F -19-08DEC00-1/1